
Temperature module TC200-P
TC200-P In a single, compact, DIN rail mount unit with High-accuracy RTD temperature meter for Pt100 100-ohm. Unit of measure (°F or °C) and resolution (1° , 0.1°), are user-selectable. 2, 3 or 4-wire hookup eliminates lead resistance effects. An analog output scaled to the display, linearizing 4-20 mA transmitter signal conditioner. A Modbus-RTU (RS-485) serial communication and dual relays for alarm or control. Four digits display to indicate value of temperature, DIN Rail TS35 (Top Hat) case.
• One input: Pt100 (-200 ~ +300 ℃)(scope optional)
• Accuracy: 0.2 (FSR%)
• One 4-20mA Output
• 2 output relays fully configurable with software
• Supported Modbus RTU Protocol
• 4-20mA loop powered, no need power supply
• DIN Rail Mounting
• Push-in type connectors
• Energize and De-energize relay selection
• Delay shutdown function
• Accuracy: 0.2 (FSR%)
• One 4-20mA Output
• 2 output relays fully configurable with software
• Supported Modbus RTU Protocol
• 4-20mA loop powered, no need power supply
• DIN Rail Mounting
• Push-in type connectors
• Energize and De-energize relay selection
• Delay shutdown function
Input : Pt100 (-200 ~ +300 ℃) (Other sensitivities available)
Input type : 2, 3, or 4 wires
Accuracy : 0.05% rdg + 0.1 °C at 25 °C (4wire)
Display Resolution : 4digit ,mines,0ne decimal point
Power Input : +24 V DC (50 mA)
Output 1 : Two-wire 4-20mA signal
Calibration method : Reference resistor /software
Relays : 2 SPDT, 1A Form C 24Vdc
Statues LED : 2 LEDs Trip, Alarm
Input type : 2, 3, or 4 wires
Accuracy : 0.05% rdg + 0.1 °C at 25 °C (4wire)
Display Resolution : 4digit ,mines,0ne decimal point
Power Input : +24 V DC (50 mA)
Output 1 : Two-wire 4-20mA signal
Calibration method : Reference resistor /software
Relays : 2 SPDT, 1A Form C 24Vdc
Statues LED : 2 LEDs Trip, Alarm
Case Material : Plastic
Mounting : DIN Rail TS35 (Top Hat)
Dimensions : 134 x 99 x 22.5 mm (H x D x W) including BNC
Connections : Push in Clamp
Conductor Size : 0.5 to 4.0 mm
Weight : 110 g (nom)
Mounting : DIN Rail TS35 (Top Hat)
Dimensions : 134 x 99 x 22.5 mm (H x D x W) including BNC
Connections : Push in Clamp
Conductor Size : 0.5 to 4.0 mm
Weight : 110 g (nom)
Operating temperature range : 0 to 55 ºC
Installation Category (IEC664) : II
Equipment Class (IEC536) : III
EMC : EN61326-1:2013
Installation Category (IEC664) : II
Equipment Class (IEC536) : III
EMC : EN61326-1:2013